6C11-12A650-CG
4CFG
DCU104
Ford
Trandzit
2.2D
96kW
MTgearbox
st10F276
ORI+noEGR
XPROG
FULL
Attention! This is only software for this ecu.
Important!
Please use the latest version of the archiver. We recommended - https://www.7-zip.org
FULL = full (BDM, BOOT or BENCH) reading of the ECU, all the information needed to restore the ECU or clone.
FLASH = full flash.
OBD = flash (BIN file) read through obd or VR(virtual read), only maps.
SGO_OBD = Updates files.
FRF_OBD = Updates files.
This software 6C11-12A650-CG 4CFG DCU104 Ford Trandzit 2.2D 96kW MTgearbox st10F276 ORI+noEGR XPROG FULL is specially for the brand ECU - FORD. It is used for competent and quick restoration of the functionality of this control unit, and also provides the ability to compare and configure the software to the needs of your client or car owner.
6C11-12A650-CG
4CFG
DCU104 These numbers are intended for precise identification of the control unit and correct selection of software. This information is intended only for narrow specialists specializing in the field of repair of automotive electronics and is in no way a repair manual.
6C11-12A650-CG
4CFG
DCU104
Ford
Trandzit
2.2D
96kW
MTgearbox
st10F276
ORI+noEGR
XPROG
FULL
Attention! This is only software for this ecu.
Important!
Please use the latest version of the archiver. We recommended - https://www.7-zip.org
FULL = full (BDM, BOOT or BENCH) reading of the ECU, all the information needed to restore the ECU or clone.
FLASH = full flash.
OBD = flash (BIN file) read through obd or VR(virtual read), only maps.
SGO_OBD = Updates files.
FRF_OBD = Updates files.
This software 6C11-12A650-CG 4CFG DCU104 Ford Trandzit 2.2D 96kW MTgearbox st10F276 ORI+noEGR XPROG FULL is specially for the brand ECU - FORD. It is used for competent and quick restoration of the functionality of this control unit, and also provides the ability to compare and configure the software to the needs of your client or car owner.
6C11-12A650-CG
4CFG
DCU104 These numbers are intended for precise identification of the control unit and correct selection of software. This information is intended only for narrow specialists specializing in the field of repair of automotive electronics and is in no way a repair manual.
6C11-12A650-CG
4CFG
DCU104
Ford
Trandzit
2.2D
96kW
MTgearbox
st10F276
ORI+noEGR
XPROG
FULL
Attention! This is only software for this ecu.
Important!
Please use the latest version of the archiver. We recommended - https://www.7-zip.org
FULL = full (BDM, BOOT or BENCH) reading of the ECU, all the information needed to restore the ECU or clone.
FLASH = full flash.
OBD = flash (BIN file) read through obd or VR(virtual read), only maps.
SGO_OBD = Updates files.
FRF_OBD = Updates files.
This software 6C11-12A650-CG 4CFG DCU104 Ford Trandzit 2.2D 96kW MTgearbox st10F276 ORI+noEGR XPROG FULL is specially for the brand ECU - FORD. It is used for competent and quick restoration of the functionality of this control unit, and also provides the ability to compare and configure the software to the needs of your client or car owner.
6C11-12A650-CG
4CFG
DCU104 These numbers are intended for precise identification of the control unit and correct selection of software. This information is intended only for narrow specialists specializing in the field of repair of automotive electronics and is in no way a repair manual.